Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD

Categories

Categories
Harlequin 10000BFS/A Bunded Biofuel Station
£10,422.00 (inc VAT) £8,685.00 (exc VAT)

Harlequin 10000BFS/A Bunded Biofuel Station

£10,422.00 (inc VAT) £8,685.00 (exc VAT)
SKU:
10000BFS/A
Quantity:
Share

Product Description

Specification

10000BFS/A

Length: 3265 mm
Width: 2800 mm
Height: 3350 mm
Weight: 725 kg
Actual Capacity: 10100 Litres
Nominal Capacity: 9595 Litres

Bunded plastic BioDiesel storage and dispensing tank, rotationally moulded from a premium, specialist grade of BioDiesel resistant, Medium Density Polyethylene. BFS Models are supplied complete with:

  • Offset 2" Fill Point with Screw Cap, Lever Type Isolation Valve and Non Return Valve
  • 4" Inspection Point with Plastic Screw Cap
  • Vent
  • Duntek 511 Electronic Oil Tank Contents Gauge with inbuilt Overfill Warning Alarm
  • Bund Warning Alarm
  • LRC Failsafe Overfill Prevention Capability
  • Lockable Access
  • 240v Electric Pump
  • 10 micron Fuel Filtration System
  • 6 metre Fuel Delivery Hose with Automatic Shut Off Nozzle
  • Digital Flow Meter
  • Emergency Isolation Switch
  • Bulkhead Light
(Please click on DELIVERY tab above.)

Additionally, a factory fitted 80 user Fuel Management System can be supplied upon request and at additional cost. Please note that this system cannot be retrofitted at a later date.

Additionally, BFA models incorporate the following features:
  • Insulated inner tank
  • Thermostatically controlled Heat Trace System
  • Thermostatically controlled Cabinet Heating System
Applications:

Suitable for the storage and dispensing of Diesel and BioDiesel grades up to B100, produced in accordance with the requirements of BS/IS EN14214 ??" including national Summer and Winter Fuel requirements for CFPP(1) in the UK and Republic of Ireland - at agricultural, commercial, industrial and institutional premises.

Satisfies or exceeds all applicable product requirements detailed within:

The Control of Pollution (Oil Storage) (England) Regulations 2001
The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 2003
The Water Environment (Oil Storage) (Scotland) Regulations 2006
Environmental Alliance Pollution Prevention Guidelines PPG 2
(1) CFPP is the Cold Filter Plug Point which indicates the temperature at or below which a fuel may begin to cause operational problems. British Standard BS EN14214 and Irish Standard IS EN14214 states Summer and Winter requirements within the UK and Republic of Ireland as -5 degrees Celsius and -15 degrees Celsius respectively.

Installation Requirements



This tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.

All mains electrical connections must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.

Delivery

Prices displayed for this item are inclusive of VAT and delivery to addresses in Great Britain or Northern Ireland, excluding offshore addresses and subject to access for an articulated lorry. If access to your address is restricted please advise at the time of placing your order to allow for arrangement of a smaller delivery vehicle. Please note it is the customer's responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer's premises. Please allow up to 10 working days for delivery.

Returns Policy

In accordance with United Kingdom and European law, customers have an unconditional right to cancel an order for a refund from Southern Tank Services Ltd, from the time the order is accepted by Southern Tank Services Ltd until 7 working days after the order is fulfilled. If a customer wishes to return and item and cancel an order with Southern Tank Services Ltd, just contact us within the period outlined above to make arrangements for the goods to be returned. It is the customer's responsibility to ensure that good care is taken of the goods whilst in their possession and that they are returned to Southern Tank Services Ltd in a condition whereby they are fit for resale and are unused.Please see our standard Terms & Conditions for further details.
Product Enquiry
First Name
Last Name*
Company
Email*
Phone
Postal Code*
Product
Description

Product Reviews

Related Products