Sorry, this product is not available to purchase directly from our website. Please contact us for a quote.
Secure Cabinet 6/20 – FWF 30, 5 Full Drawers tails
Substances in work areas, in accordance with DIN EN14470-1 and TRGS 510(Annex 3) *.
The secure cabinets F-SAFE are design approved in accordance with DIN EN 14470-1 and correspond to DIN EN 14727 (Laboratory Furniture Directive). Body colour light grey, similar to RAL 7035. Door colour zinc yellow, similar to RAL 1018. sign GS and CE
– 30 minute fire-resistance
– single-layer doors and walls in homogeneous full material
– in case of fire, self-closing ventilation openings on the top of the cabinet, DN 100 mm
– hydraulic door closer with integrated arrest system (thermally triggered)
– Earthing to avoid the danger of ignition due to electrostatic charge
– height-adjustable feet, can be aligned from inside
– with removable base trim allowing forklift/pump truck access
– 5 steel plate Drawers powder-finished in RAL 7035,easy to operate fully-extending drawers for the storage of small containers, load bearing capacity 65 kg
In accordance with TRGS 510 (Annex 3), the fire resistance may be less than 90 minutes, but must be at least 30 minutes, if
1. only one cabinet is installed per separate building unit/fire(-fighting) compartment; if the area of the separate building unit/fire (-fighting) compartment is greater than 100 m², one cabinet may be installed every 100 m²
2. only one of the separate building unit/fire (-fighting) compartment is protected by an automatic fire detection system and plant
fire brigade with a response time of at most 5 minutes from the alarm being raised, or an automatic extinguishing system is in place.
Emerging vapours and gases must be extracted directly on location. The ventilation systems prevent a build-up of gases in secure cabinets.
– Fans and the exhaust system must be connected to an exhaust air line that leads to the open air.
– The air filter system cleans the air and does not need an exhaust air line.
Exhaust air fan with airflow monitoring
– sheet steel housing, powder-coated, light grey RAL7035
– includes cabinet connection adapter
– ATEX-compliant for extraction from Ex-zone 2 and installation in Ex-free zone
– sound pressure level Lp2A: 35 dB(A)
– flow rate: 50 – 200m³/h
– overall pressure: 250 – 50 Pa
– floating output via DIN socket
– voltage: 230 V
– power consumption: max. 0.45 A
– frequency: 50 Hz
– protection class CE II 3 G T4
There are no reviews yet.
You must be logged in to post a review.
Please See 'Information' Section at top of Page Regarding potential Extended Lead - Times Thank you Dismiss
Sign up to our newsletter to be the first to hear about our latest products, special offers and expert advice.