Tankmaster Valve Body – Atkinson Tank Master

Tankmaster Sight Tubes are supplied with a white UPVC support shield on models up to 5ft and Aluminium support shield on 6ft+ models. Available sizes: 4ft 6″, 5ft, 6ft, 8ft, 9ft, 10ft.

The Atkinson Tankmaster Valve comprises the following features;

• PVC Sight Gauge
• Pull-To-Read valve to isolate flow into tube during rest
• On/Off Handwheel
• Eutectic Solder Firevalve built into handwheel
• 10mm Brass Compression Fitting Outlet
• 52 Micron Nylon Filter (Replaceable)
• Reversible body for left or right hand exit of compression fitting
• Standoff Clip for mounting top of tube to top of tank
• 1/2″ BSP Male Tank / Extension Fitting

1. Control Valve to turn on/off oil supply;
2. Pull to Read Valve/Sight Tube allows inspection of tank contents level;
3. Integral Filter to ensure only clean oil is allowed to pass from the tank;
4. Self-Closing Hand Wheel isolates oil supply in case of fire near the tank.

Tip: If you are fitting this tankmaster to a plastic tank then the outlet will be recessed and you will require an extension fitting to ensure the Atkinson Tankmaster Valve does not foul the end of the tank and prevent installation.  Extension pieces are available in 1″, 3-1/2″ , 6-1/4″ and 7-1/4″, These are 1″ BSP Male Tank fitting/lock-nut at one end and 1/2″ BSP Female at the other end.

Tip: Sight Gauges should not be fitted to bunded tanks; however, they may be used on any single skinned tank or in any area that is protected by a bund.