- Description
IPU EKO Fuel Polishing Fixed Unit with Kapture Technology
The EKO System with Kapture technology is a high-performance fuel polishing system that represents a major step forward in protecting diesel fuel from harmful contaminants in storage tanks up to 10,000 litres capacity.
The system builds on IPU Group’s extensive expertise in fuel management and brings together a compact high-performance fuel polishing unit with an intelligent microprocessor control module. This specialised combination is custom designed to monitor and control fuel cleaning systems with a lower purchase and lifetime maintenance cost in mind.
But this is achieved without compromising on performance. The EKO System with Kapture Technology delivers an exceptional cleaning capability that is 87% higher than the industry standard, achieving a 13/11/18 level of cleanliness at both high and low flow rates. System flexibility is essential when operating in a diverse range of applications and so monitoring is highly adaptable, whether using the programmable seven-day time control function, manual control (fascia control) or expanded further to manage communication remotely via BMS input or RS485. The system can function in either full mode for more regular operation or ‘holiday mode’ when running for limited or occasional periods.
Predictive maintenance
IPU’s Kapture Technology continuously monitors fuel contamination levels and allows the user analyse trends data over time.
Analytical data and trend information can be saved and downloaded from the system allowing a deeper analysis of site conditions which could affect fuel condition or cause degradation.
Total flexibility
The system integrates with almost any sensor (0-5V, 0-10V, 4-20mA, Resistive and Digital), allowing the EKO System with Kapture Technology to be extremely flexible.
All sensor data can be saved in the control panels non-volatile memory, allowing up to two years (depending on frequency and quantity of sensors being saved) of historical data to be captured by the panel for direct viewing on the LCD display or to download via IPU’s own E.A.R.L.™ software via a USB connection.
Specifications
Dimensions (H) x (W) x (D) 930mm x 445mm x 217mm Weight 31kg Operating Conditions -20°C to +60°C Environment Control Box IP44 Connections 1” BSPP Male Coned Inlet & Outlet FILTRATION Fluid Compatibility Diesel & mineral oils Media Particulate – 1, 3, 5, 10 or 25 Micron & Water Filter Blocked Indicator Electronic via Control Panel LED ELECTRICAL Voltage 230 VAC (±10%) Nominal Frequency 50Hz Nominal Motor Current 3.5A Motor Protection Automatic Thermal Protection Switch PUMP Flow 50 litres per minute Type Self-Priming Vane Duty Cycle Continuous Noise Level <85dB @ 1 Metre - Delivery
There may be an additional charge for delivery of items outside UK mainland and offshore addresses; under these circumstances, please contact us for an updated quote on delivery before placing your order. Further payment may still be required for larger items – Please get in touch with us and we can arrange an updated invoice to reflect this. Your purchase with us will be held and stock allocated.
This includes Scotland, the Highlands and Islands, Northern Ireland, the Isle of Wight and the Isle of Man.
Postcodes including (but not limited to) DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK PO (PO – Isle of Wight) and G.
If access to the delivery address is restricted, please advise when placing the order. This will allow us to arrange for a suitably sized delivery vehicle. The customer is responsible for arranging for large items to be offloaded from the delivery vehicle at the customer’s premises. Please allow up to 10 working days for delivery.
Our suppliers arrange delivery at the source, so carriage charges may vary based on your postcode. We will happily provide you with a delivery quote; just call us on 01722 442446.
Next-Day Delivery is not Guaranteed – The order Cut-off for Qualifying next-day delivery addresses is 3pm. But please contact us as some orders can still be fulfilled after this time.
- Returns Policy
In accordance with United Kingdom and European law, customers have an unconditional right to cancel an order for a full refund from Tank Services up to 14 days after the goods are received by you.
If a customer wishes to return an item and cancel an order with Tank Services, please contact us within the period outlined above to arrange for the goods to be returned at cost to you. It is not Tank Services’ responsibility to pay for the return of your goods (see T&Cs for more information ).
Please take care when ordering the correct product, as the cost of returning tanks and bulky goods can be expensive.
It is the customer’s responsibility to ensure that good care is taken of the goods whilst in their possession. Goods must be returned to Tank Services in a suitable resale condition and unused as determined by the Supplier. Please see our standard Terms & Conditions for further details.
For BUSINESS Customers & Bespoke items; any refund will be less an administration fee of 20% + VAT of the total order value.
IPU EKO Fuel Polishing Fixed Unit with Kapture Technology 50lpm
Enquire about IPU EKO Fuel Polishing Fixed Unit with Kapture Technology 50lpm
SKU: EKOwithKT
Got a Technical Question About This Product?
- Enquire About Stock or Availability
Got a Technical Question About This Product?