- Description
IPU DDF6 Fuel Polishing Fixed Unit
The DDF6 Fuel Polishing System is a powerful high flow fuel filtration and polishing module utilizing a two-stage filtration principle, which ensures that solid contamination, microbial activity and water ingress can all be effectively removed in a single pass.
- Flow rates up to 500 l/min.
- Filtasorb2 water removal media able to remove 100% free water and 99% entrained water from diesel fuel.
- System rated at 10 bar working pressure with safety shut-off at 3.5 bar.
- Optional secondary outlets allow the filters to be bypassed.
- Leakage or Spillage alert with float switch located in drip tray.
DDF6 Fuel Polishing System Features & Benefits
Faster solution, greater savings
Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned.
The DDF6 Fuel Polishing System delivers a powerful throughput of up to 500 l/min. The DDF6 removes both solid particulate and water in a single pass ensuring fuel is clean and dry, is within specification and ready for use when required.
Features
- Compact floor mounted unit.
- Flow rates of up to 150 l/min.
- Push button or touchscreen control.
- High volume dirt holding capacity to deliver ISO cleanliness codes of 18/16/13 or better.
- Optional high performance Filtasorb2 inserts to achieve 100ppm or better.
- Dual stage filtration.
- Extensive selection of filter cell inserts to suit every clean-up application.
- Differential pressure gauge indication of system performance.
- 7 day programmable timer.
- Water drain valve on sump of filter housing.
- Rugged frame with integral drip tray.
- Safety features as standard; emergency stop, beacon alarm & float switch.
- Suitable for most diesel, kerosene and biodiesel (B100).
Specifications
Model DDF6 Flow rate (l/m) Up to 500lpm Indicative tank size (l) 100,000+ Filtration Efficiency (max.) 99.9% Particulate Removal (min.) 1 µm No. filter housings 6 Filter size & type Size 2 Enclosure None / GRP Control System Push-Button / Touch-Screen Pump Type Self Priming Centrifugal or as specified Maximum System Pressure 3 bar Remote Emergency Stop Yes (with Enclosure Version) Differential Pressure Indicator Electrical x6 Float Switch Yes Voltage (V) 415 Frequency (Hz) 50 Noise Level (dBA @ 1m) < 85 Operating Temperature (°C) 0 to 50°C Environmental Protection IP66 Dimensions (mm) 1457 (h) x 2270 (w) x 1193 (d) Dry Weight (kg) 614 Inlet Connections 2″ BSP Outlet Connections 2″ BSP BMS System Yes - Delivery
There may be an additional charge for delivery of items outside UK mainland and offshore addresses; under these circumstances, please contact us for an updated quote on delivery before placing your order. Further payment may still be required for larger items – Please get in touch with us and we can arrange an updated invoice to reflect this. Your purchase with us will be held and stock allocated.
This includes Scotland, the Highlands and Islands, Northern Ireland, the Isle of Wight and the Isle of Man.
Postcodes including (but not limited to) DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK PO (PO – Isle of Wight) and G.
If access to the delivery address is restricted, please advise when placing the order. This will allow us to arrange for a suitably sized delivery vehicle. The customer is responsible for arranging for large items to be offloaded from the delivery vehicle at the customer’s premises. Please allow up to 10 working days for delivery.
Our suppliers arrange delivery at the source, so carriage charges may vary based on your postcode. We will happily provide you with a delivery quote; just call us on 01722 442446.
Next-Day Delivery is not Guaranteed – The order Cut-off for Qualifying next-day delivery addresses is 3pm. But please contact us as some orders can still be fulfilled after this time.
- Returns Policy
In accordance with United Kingdom and European law, customers have an unconditional right to cancel an order for a full refund from Tank Services up to 14 days after the goods are received by you.
If a customer wishes to return an item and cancel an order with Tank Services, please contact us within the period outlined above to arrange for the goods to be returned at cost to you. It is not Tank Services’ responsibility to pay for the return of your goods (see T&Cs for more information ).
Please take care when ordering the correct product, as the cost of returning tanks and bulky goods can be expensive.
It is the customer’s responsibility to ensure that good care is taken of the goods whilst in their possession. Goods must be returned to Tank Services in a suitable resale condition and unused as determined by the Supplier. Please see our standard Terms & Conditions for further details.
For BUSINESS Customers & Bespoke items; any refund will be less an administration fee of 20% + VAT of the total order value.
IPU DDF6 Fuel Polishing System - Fixed Unit 500lpm
1591x1214x540
Enquire about IPU DDF6 Fuel Polishing System - Fixed Unit 500lpm
SKU: DDF6
Got a Technical Question About This Product?
- Enquire About Stock or Availability
Got a Technical Question About This Product?