
- Description
IPU DDF1 Fuel Polishing Fixed Unit Stored fuel in the tank will deteriorate over time due to oxidisation and microbial activity, and tank storage is more susceptible to microbial activity as sludge is often found at the bottom of these tanks, but our DDF1 Fuel Polishing System could answer this problem.
With this in mind IPU have developed a new range of fuel polishing units specifically for tank polishing: on tank units.
The DDF1 Fuel Polishing System is a compact wall-mounted fuel polishing cabinet designed specifically for the removal of particulate and water moisture contamination that can accumulate in stored fuel over time. With dual particulate and water removal and flow rates of up to 50 l/min the DDF1 Fuel Polishing System will leave your fuel ready for use anytime.
Features
- Compact wall mounted unit
- Stainless steel cabinet enclosure
- Flow rates of up to 50 l/min
- High volume dirt holding capacity to deliver ISO cleanliness codes of 18/16/13 or better
- Extensive selection of filter cell inserts to suit every clean-up application
- Differential pressure gauge indication of system performance
- Water drain valve on sump of filter housing
- Rugged frame with integral drip tray
- Safety features as standard; emergency stop, beacon alarm & float switch
- Suitable for most diesel, kerosene and biodiesel (B100)
Specifications
Model DDF1 Flow rate (l/m) 50 Indicative tank size (l) 10,000 Filtration Efficiency (max.) 99.9% Particulate Removal (min.) 1 µm No. filter housings 1 Filter size & type Size 9 Enclosure Mild Steel / Stainless Steel Control System Push-Button Pump Type Self Priming Vane Maximum System Pressure 3 bar Remote Emergency Stop Yes Differential Pressure Indicator Electrical Float Switch Yes Voltage (V) 230 Frequency (Hz) 50 / 60 Noise Level (dBA @ 1m) < 85 Operating Temperature (°C) 0 to 50°C Environmental Protection IP66 Dimensions (mm) 900 (h) x 900 (w) x 400 (d) Dry Weight (kg) 66 Inlet Connections 1″ BSP M Outlet Connections 1″ BSP M BMS System Yes - Delivery
There may be an additional charge for delivery of items outside UK mainland and offshore addresses; under these circumstances, please contact us for an updated quote on delivery before placing your order. Further payment may still be required for larger items – Please get in touch with us and we can arrange an updated invoice to reflect this. Your purchase with us will be held and stock allocated.
This includes Scotland, the Highlands and Islands, Northern Ireland, the Isle of Wight and the Isle of Man.
Postcodes including (but not limited to) DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK PO (PO – Isle of Wight) and G.
If access to the delivery address is restricted, please advise when placing the order. This will allow us to arrange for a suitably sized delivery vehicle. The customer is responsible for arranging for large items to be offloaded from the delivery vehicle at the customer’s premises. Please allow up to 10 working days for delivery.
Our suppliers arrange delivery at the source, so carriage charges may vary based on your postcode. We will happily provide you with a delivery quote; just call us on 01722 442446.
Next-Day Delivery is not Guaranteed – The order Cut-off for Qualifying next-day delivery addresses is 3pm. But please contact us as some orders can still be fulfilled after this time.
- Returns Policy
In accordance with United Kingdom and European law, customers have an unconditional right to cancel an order for a full refund from Tank Services up to 14 days after the goods are received by you.
If a customer wishes to return an item and cancel an order with Tank Services, please contact us within the period outlined above to arrange for the goods to be returned at cost to you. It is not Tank Services’ responsibility to pay for the return of your goods (see T&Cs for more information ).
Please take care when ordering the correct product, as the cost of returning tanks and bulky goods can be expensive.
It is the customer’s responsibility to ensure that good care is taken of the goods whilst in their possession. Goods must be returned to Tank Services in a suitable resale condition and unused as determined by the Supplier. Please see our standard Terms & Conditions for further details.
For BUSINESS Customers & Bespoke items; any refund will be less an administration fee of 20% + VAT of the total order value.
IPU DDF1 Fuel Polishing System - Fixed Unit 50lpm
Enquire about IPU DDF1 Fuel Polishing System - Fixed Unit 50lpm
SKU: DDF1
Got a Technical Question About This Product?
- Enquire About Stock or Availability
Got a Technical Question About This Product?