- DescriptionIPU DDF2 Fuel Polishing Fixed Unit The DDF2 Fuel Polishing System is a compact floor mounted fuel polishing cabinet designed specifically to remove the solid and microbial contamination typically found at the bottom of tanks. With flow rates of up to 100 l/min, the DDF2 will keep stored fuel in prime condition
Features
- Compact floor mounted unit
- GRP weather proof enclosure (optional)
- Flow rates of up to 100 l/min
- High volume dirt holding capacity to deliver ISO cleanliness codes of 18/16/13 or better
- Optional high performance Filtasorb2 inserts to achieve 100ppm or better
- Extensive selection of filter cell inserts to suit every clean-up application
- Differential pressure gauge indication of system performance
- Water drain valve on sump of filter housing
- Rugged frame with integral drip tray
- Safety features as standard; emergency stop, beacon alarm & float switch
- Suitable for most diesel, kerosene and biodiesel (B100)
Specifications
Model DDF2 Flow rate (l/m) Up to 100lpm Indicative tank size (l) 30,000 Filtration Efficiency (max.) 99.9% Particulate Removal (min.) 1 µm No. filter housings 1 Filter size & type Size 1 Enclosure None / GRP Control System Push-Button / Touch-Screen Pump Type Self Priming Vane Maximum System Pressure 3 bar Remote Emergency Stop Yes with Enclosure Option Differential Pressure Indicator Electrical Float Switch Yes Voltage (V) 230 Frequency (Hz) 50 Noise Level (dBA @ 1m) < 85 Operating Temperature (°C) 0 to 50°C Environmental Protection IP66 Dimensions (mm) 1430 (h) x 1320 (w) x 440 (d) (Frame Mounted) / 1600 (h) x 1600 (w) x 550 (d) (GRP Enclosure) Dry Weight (kg) 110 (Frame Mounted) / 155 (GRP Enclosure) Inlet Connections 1.25″ BSP Outlet Connections 1.25″ BSP BMS System Yes - Delivery
There may be an additional charge for delivery of items outside UK mainland and offshore addresses; under these circumstances, please contact us for an updated quote on delivery before placing your order. Further payment may still be required for larger items – Please get in touch with us and we can arrange an updated invoice to reflect this. Your purchase with us will be held and stock allocated.
This includes Scotland, the Highlands and Islands, Northern Ireland, the Isle of Wight and the Isle of Man.
Postcodes including (but not limited to) DD, PH, IV, KW, HS, AB, PA, KA, ML, EH, KY, FK PO (PO – Isle of Wight) and G.
If access to the delivery address is restricted, please advise when placing the order. This will allow us to arrange for a suitably sized delivery vehicle. The customer is responsible for arranging for large items to be offloaded from the delivery vehicle at the customer’s premises. Please allow up to 10 working days for delivery.
Our suppliers arrange delivery at the source, so carriage charges may vary based on your postcode. We will happily provide you with a delivery quote; just call us on 01722 442446.
Next-Day Delivery is not Guaranteed – The order Cut-off for Qualifying next-day delivery addresses is 3pm. But please contact us as some orders can still be fulfilled after this time.
- Returns Policy
In accordance with United Kingdom and European law, customers have an unconditional right to cancel an order for a full refund from Tank Services up to 14 days after the goods are received by you.
If a customer wishes to return an item and cancel an order with Tank Services, please contact us within the period outlined above to arrange for the goods to be returned at cost to you. It is not Tank Services’ responsibility to pay for the return of your goods (see T&Cs for more information ).
Please take care when ordering the correct product, as the cost of returning tanks and bulky goods can be expensive.
It is the customer’s responsibility to ensure that good care is taken of the goods whilst in their possession. Goods must be returned to Tank Services in a suitable resale condition and unused as determined by the Supplier. Please see our standard Terms & Conditions for further details.
For BUSINESS Customers & Bespoke items; any refund will be less an administration fee of 20% + VAT of the total order value.
IPU DDF2 Fuel Polishing System - Fixed Unit 100lpm
Enquire about IPU DDF2 Fuel Polishing System - Fixed Unit 100lpm
SKU: DDF2
Got a Technical Question About This Product?
- Enquire About Stock or Availability
Got a Technical Question About This Product?